SQ Acoustic Liner Instructions

The Acoustic Foam is best applied to the rear of the door card or directly to the metal when used over regular sound deadening.

Surface Preparation:  The surface you are treating must be clean. Remove any dust or rust. Use a degreasing agent or appropriate organic solvent to degrease greasy surfaces

Cutting: Use a Stanley knife or sharp large scissors to cut the product to the desired shape.

Application: Start at one side and gradually pull back the adhesive backing and press the sheet onto the door card. use your hands to press the sheet into all the contours and ensure good adhesion.

Simple peel and stick the foam to the rear of the door trim card, making sure to leave clearance for the clips and door furniture.

SQ Acoustic Liner Installl